| |
Laser Engraver Machine : LEE
Specifications
| Laser Source |
RF 25 Watt Sealed CO2 Laser Tube(Air-cooled) |
RF 60 Watt Sealed CO2 Laser Tube(Air-cooled) |
RF 100 Watt Sealed CO2 Laser
Tube(Water-cooled) |
| Net Weight |
200 Kgs |
210 Kgs |
230 Kgs |
| Working Area(WxD) |
914.4 x 609.6 mm (36"
x 24") |
| Maximum Part Size(WxDxT) |
955 x 675 x 230 mm
(37.6"x 26.6" x 9") |
| Overall Dimensions(WxDxH) |
1210 x 1036 x 1040
mm (82.7"x 84.6" x 48.2") |
| Computer Communication |
Parallet port with
supplied cable |
| Memory Buffer |
64 Mega Bytes |
| Standard Focus Lens |
2.0" |
| Engraving Speed (Max) |
Up to 1524 mm/sec (60
inch/sec) |
| Laser Power Control |
Digital laser power
control with automatic proportional pulsing and
8 colors linked power setting per job |
| Power Supply |
Single phase, 220VAC,
6 Amp, 50/60Hz |
| Windows Driver |
EZ-LASER |
Features
Features of EZ-LASER LEE Series
- V-guild design to make the X-axis slider moving stable and easy to assemble.
- Path order to be assigned automatically by pen-color ranking.
- EZ-LASER driver to link LEE with most popular Windows based software such as CorelDraw.
- Vector & Raster operating mode of engraving to enable combining or independent work.
- Reliable module design to assure easy maintenance.
- Directly changing parameters on operation panel without sending files from computer too many
times in order to get the optimum value for workpiece against time.
Adjustable velocity of motorized Z-axis pallet to allow fine tuning of focus length. |
|
Focus lens of LEE |
Facility Requirements
| Host PC |
Windows 98, ME, Xp capable system |
| Exhaust System |
One exhaust blower (3/4HP), Pressure 70 mmAq, Air flow 16m3/min, with one 6" diameter hoses |
Applications
| Applications |
| Acrylic
Display Stand |
Marquetry |
Decorations
|
Name
Badges |
Signs
|
Embroidery
and Textile |
Gaskets
|
Router Template Stencils |
Matte
Board
|
Plastic Fabrication |
Architecture
models
|
Rubber Stamps |
Hobby
Models
|
Photo Frame |
2D
Prototypes
|
|
| Materials Applicable |
| Acrylic, Veneer,
MDF board, Wood, Plywood, Masonite , Rubber, Vinyl,
Foam, Nylon, Cloth, Textile, Polycarbonate, Fabric,
Chipboard, Cardboard, Paper, ABS, Polyester, PP,
Leather |
Available Options
| Honeycomb Table |
To minimize burning in the back side of materials |
| Beam Expander |
To get similar laser dot whether far or near
point on workpiece |
| Focus Lens 1.5" ; 2.5" |
1.5" for smaller laser dot ; 2.5" for
thick workpieces |
| Dual Head |
To increase production rate |
| Compressor |
To provide flowing jet air for Air-assist especially
on rubber material application |
| Dry Air Machine |
To prevent focus lens from humid damage while
laser beam pass through |
|
