| |
Laser Cutting Machine : LCD-Ⅲ
Specifications
| EZ-CUT II Series － LCDⅢ |
| Laser Source |
DC 200 watt Sealed CO2 Laser |
Tube RF 200 watt Sealed CO2 Laser Tube |
RF 400 watt Sealed CO2 Laser Tube |
| Weight(Net) |
1100 kgs |
1120 kgs |
1200 kgs |
| Working Area(WxD) |
1250x1250mm(49.2"x49.2") |
1250x1100mm
(49.2”x43.3”) |
| Maximum Part Size(WxDxT) |
1500x1500x50mm(57.5"x57.5"x2") |
| Overall Dimensions(WxDxH) |
2100x2150x1225mm(82.7"x84.6"x48.2") |
| Motion Control |
CNC commands (G,M code) |
| PC Communication |
RS-232 serial port with supplied cable |
| Memory Buffer |
32K Words |
| Focus Lens |
5.0" |
| Speed (Max) |
Up to 16 M/min traversing, 5 M/min cutting |
| Laser Power Control |
Digital laser power control with automatic proportional pulsing and color linked |
| Cutting Pallet |
Steel structure with removable copper needle |
| Power Supply |
Single phase, 220VAC, 10/15 Amp, 50/60Hz |
| CAM Software |
EZ-CUT Ⅱ (Acceptable DXF/HPGL/CNC code files ) |
| Available Option |
Beam Expander |
Features
- Optic path compensation design to cut work-piece with the same kerfs width. ( picture 3 )
- Z-axis tracer to follow the height of work-piece and adjust the focusing accordingly. ( picture 1 )
- Touch panel unit to allow the input of laser parameters, diagnosis of laser devices and convenient operation of laser machine. ( picture 2 )
- Magnetic linear scaler to help calibration of motions and get position accuracy at + / - 0.05㎜.
- EZ-CUT ⅡCAM software to work with most popular Windows based CAD software such as AutoCAD.
- EZ-CUT Ⅱ to“Pre-fetch”small line segments and produce arcs for quick cutting.
- EZ-CUT Ⅱto“Off-set”a drawing and generate the envelop of it to form a new drawing. A wider cut width for die-board can be produced then.
- Path Order to be assigned both automatically and manually.
- Good control over corner cut to have a 90 degree corner.
- Durable A.C. servo motor to have high-speed motion control.
- Beam-expander (Options) and adjustable focusing to get sharp cutting edge.
- Well sealed focusing unit to allow fine tuning over assist-air.
- Modular design to assure easy maintenance.
picture 1 | 
picture 2 | 
picture 3 |
Facility Requirements
| EZ-CUT II LCD Series |
| Host PC |
Windows 95 , 98 , Me , Xp capable system |
| Assist-Air |
Gas tank or Compressor to provide dry air, 20Lit/min, 5 Bar, with 8mm diameter hose |
| External Chiller |
DI water, 4000 BTU(100W) ; 6000 BTU(200W) cooling capability, Flow rate> 5Lit/min |
| Exhaust System |
Two exhaust blowers (1/2 HP), Pressure 50mmAq, Air flow 25 CMM, with two 8" diameter hoses |
Applications
| Acrylic Display Stand |
Marquetry |
Decorations
|
Die Board |
Signage
|
Embroidery and Textile |
Gaskets
|
Router Template Stencils |
Architecture models
|
Plastic Fabrication |
2D Prototypes
|
Photo Frame |
Available Options
| Manual roll feeding support |
To feed rolled material through the cutting bed |
| Compressor |
To provide flowing jet air for Air-assist |
| Beam Expander Collimator Assembly |
To adjust laser mode getting sharp cutting edge, special for die-board cutting |
| Needle Table |
Steel structure with removable needle for die-cutting only |
| Dry Air Machine |
To prevent focus lens from humid damage while laser beam pass through |
|
